Denso Alternator Installation on the URAL

Denso Alternator Installation on the URAL

Description

#1: Connect the two ring type eyelet connectors to the top post connector. That's the simple part.

#2: Connect the existing green spade type connector to the left (horizontal) of the two terminals on the back of the alternator.

#3: Now, you've got that new red pigtail to hook up. Look for the ignition power wire coming out of the top of the front ignition cover. Follow it back a few inches to the black plastic connector. Pull it apart. Plug in the short female connector to the wire coming out of the ignition cover, and plug the male connector into the main wiring harness side. Now, run the long red wire and attach it to the right side (vertical) connector on the back of the alternator, right next to that pretty green wire. Congratulations, you're wired!




Tags: Denso Alternator, Russian Iron, URAL, Crawford, Terry, motorcycles
Detailed Information
Detailed Description
This tech tip is by Terry Crawford of Crawford Sales. Terry is always very helpful when you call for advice. His website is below.
Location
Frederick, Maryland
Today in Aviation History